The filter element is made from medical grade, type 304 stainless steel micronic filter cloth providing 
unmatched protection against oil contamination and resultant engine damage. A 
one inch square of this material flows an incredible 1.9 gallons of oil per 
minute at only 1 PSI pump pressure. The adhesive used in the filter assembly 
process is good to 600 degrees Fahrenheit, far above normal engine operating 
temperatures. A super strength nickel-plated neodymium rare earth magnet is 
installed in the top of the element for magnetic pre-filtering of the oil. The 
unique twist lock design allows for easy disassembly, inspection and cleaning. 
The quad-ring gasket doubles the seal between the filter and the engine. 
Finally, the filter housing is carved out of a solid chunk of 6061T6 billet 
aluminum, which not only looks trick but aids in dissipating heat.
                     
 
  - Cleanable and Reusable 
  
- Proven Technology
  
- High Flow Rate
  
- Superior Filtration 
  
- Easy Filter Element 
  Inspection
  
- Unaffected by Water, Heat, 
  Pressure   
  
- Environmentally Friendly 
    
 - We recommend the K&P Micronic 
Stainless Steel Oil Filter be cleaned frequently when first purchased or when 
engine work has been performed. This will give you a feel for how much debris is 
being filtered out of your machines oil and help you decide how often you want 
to clean the filter for your application. At minimum, clean the filter with 
every oil change. Remember, oil is the lifeblood of your machine, keep it clean! 
              
Wash the 
reusable stainless steel filter element in clean solvent, kerosene, aerosol 
carburetor cleaner or any other degreasing agent; even common dish soap and 
water. If inspection of trapped debris is desired, flush the particles into a 
light colored, clean container. Once clean, lightly blow air through the filter 
from the inside out to remove any small particles or cleaning agent from the 
screen. Finally, if you have a spin on model, clean the inside of the filter 
housing using the same type of cleaner as used on the reusable filter element.